1.Khanger, R. and A. Bardhan, Challenges in Developing Low Rolling Resistance Tyre. 2015. 1.
2.Derafshpour, S., A. Mardani, and M. Valizadeh, Evolutionary algorithms application for improving the tire rolling resistance based on Wismer–Luth model. Neural Computing and Applications, 2019. 32(9): p. 5173-5183.
3.Steyn, W.J., et al., Vehicle Rolling Resistance as Affected by Tire and Road Conditions. Geo-China 2016: p. 129-136.
4.Ejsmont, J.A., et al., Analysis of Rolling Resistance of Tires with Run Flat Insert. Key Engineering Materials, 2013. 597: p. 165-170.
5. Zhang, P., M. Morris, and D. Doshi, Materials development for lowering rolling resistance of tires. Rubber Chemistry and Technology, 2016. 89.
6. Akutagawa, K., Technology for Reducing Tire Rolling Resistance. Tribology Online, 2017. 12(3): p. 99-102.
7.Veiga, V.D.A., et al., Tire tread compounds with reduced rolling resistance and improved wet grip. Journal of Applied Polymer Science, 2017. 134(39): p. 45334.
8. Nikiel, L., et al., Filler Dispersion, Network Density, and Tire Rolling Resistance. Rubber Chemistry and Technology, 2001. 74: p. 249-259.
9. Ashraf, M., et al., Effects of Size and Aggregation/Agglomeration of Nanoparticles on the Interfacial/Interphase Properties and Tensile Strength of Polymer Nanocomposites. Nanoscale Research Letters, 2018. 13.
10. Gbologah, F.E., H. Li, and M.O. Rodgers, Demonstrating an Empirical Tool to Predict Fleet-Wide Heavy-Duty Vehicle Fuel-Saving Benefits from Low Rolling Resistance Tires. Transportation Research Record: Journal of the Transportation Research Board, 2019. 2673(4): p. 361-372.
11. Bhatt, P. and U.K. Vates. Low Rolling Resistance Tires for E-Rickshaws for Increasing Range and Capacity. in Advances in Engineering Design. 2019. Singapore: Springer Singapore.
12. Aldhufairi, H.S., K. Essa, and O. Olatunbosun, Multi-Chamber Tire Concept for Low Rolling-Resistance. SAE International Journal of Passenger Cars - Mechanical Systems, 2019. 12(2).
13. Taryma, S., et al., Road Texture Influence on Tire Rolling Resistance. Key Engineering Materials, 2013. 597: p. 193-198.
14. Davris, T., et al., Filler Size Effects on Reinforcement in Elastomer-Based Nanocomposites: Experimental and Simulational Insights into Physical Mechanisms. Macromolecules, 2016. 49(18): p. 7077-7087.
15. N. A. Habib, A.S.J., F. L. Hassan and N. I. Intan, Crosslinking Density Characteristics of a Nanocomposite Elastomer. Conference Series, 2021.
16. Kourki, H., et al., Modeling the rheological properties of highly nano-filled polymers. Journal of Composite Materials, 2017. 51(19): p. 2813-2824.
17. Bashir, M.A., et al., Effect of Carbon Black on Curing Behavior, Mechanical Properties and Viscoelastic Behavior of Natural Sponge Rubber-Based Nano-Composites. Key Engineering Materials, 2012. 510-511: p. 532-539.
18. Kourki, H., M. Mortezaei, and M.H. Navid Famili, Prediction of the viscoelastic response of filler network in highly nanofilled polymer composites. Journal of Composite Materials, 2015. 49(30): p. 3799-3807.
19. Kourki, H., et al., Mixing challenges for SiO2/polystyrene nanocomposites. Journal of Thermoplastic Composite Materials, 2017. 31(5): p. 709-726.
20. Sarkawi, S., et al., A review on reinforcement of natural rubber by silica fillers for use in low-rolling resistance tyres. 2015. 18: p. 203-233.
21. Mahdizadeh Farsangi, S., H. Kourki, and H. Moradi Shahrbabaki, Application of rheology as a tool to estimate the mixing quality of elastomeric nanocomposites and comparing with small-angle X-ray scattering microstructural study. Journal of Elastomers & Plastics, 2023. 0(0): p. 00952443231177694.
22. Fernandes, M.R.S., Sousa, Ana Maria Furtado de and Furtado, Cristina Russi GuimarãesRice husk ash, as filler in tread compounds to improve rolling resistance. Polímeros, 2017: p. 55-61.
23. Kong, L., et al., In situ assembly of SiO2 nanodots/layered double hydroxide nanocomposite for the reinforcement of solution-polymerized butadiene styrene rubber/butadiene rubber. Composites Science and Technology, 2018. 158: p. 9-18.
24. Ye, N., et al., Performance enhancement of rubber composites using VOC-Free interfacial silica coupling agent. Composites Part B: Engineering, 2020. 202: p. 108301.
25. Lolage, M., et al., Synergistic effects of silica and nanoclay on curing characteristics, processing behaviour and mechanical properties of solution styrene butadiene rubber (SBR)–based tire tread compounds. Emergent Materials, 2022. 5(3): p. 957-966.
26. Kourki, H. and M.H.N. Famili, Particle sedimentation: effect of polymer concentration on particle–particle interaction. Powder Technology, 2012. 221: p. 137-143.
27. Kourki, H., M. Mortezaei, and M.H. Navid Famili, Filler networking in the highly nanofilled systems. Journal of Thermoplastic Composite Materials, 2014. 29(8): p. 1047-1063.
28. Kourki, H., et al., Highly nanofilled polystyrene composite: Thermal and dynamic behavior. Journal of Elastomers & Plastics, 2016. 48(5): p. 404-425.
29. Bösl, R. and K. Meier, Measurement of Rolling Resistance and Energy Efficiency of Car Tires. ATZautotechnology, 2011. 11(6): p. 34-37.
30. Hu, H., et al., Effect of filler network on dynamic viscoelastic properties of uncured polymethylvinylsiloxanes filled with silica and carbon black. Journal of Applied Polymer Science, 2006. 99(6): p. 3477-3482
